Skip to main content

一个关于声卡识别的问题

环境为Windows XP SP2, 声卡realtek hd audio， 似乎是nvidia的主板

症状比较特别， 是偶然卸了某驱动后发现很多硬件不能用了， 打开设备管理器发现dvd-rom, 声卡等都有黄色叹号， 另外还有一个"Plug and Play Software Device Enumerator" 也是这样。

一开始想用"卸载-重新识别"的方法， 但是那个"Plug and Play Software Device Enumerator"卸掉便一去不复返了。 一开始我没在意， 全心折腾声卡， 但是总是不行， 后来在网上艰难搜索才发现问题就出现在那个"Plug and Play Software Device Enumerator"上。

网上有个从系统目录copy出inf, sys, dll个一个文件， 稍微修改并利用它们安装一个这个硬件的方法。 我没试成功（后来发现是没理解好说明）。 之后在
http://www.softwaretipsandtricks.com/forum/windows-xp/7021-no-sound-says-no-audio-device-but-drivers-there-enabled-working-properly-5.html找到了一种解法， 原文加翻译如下：

1. From Device Manager (be sure to select View/Show hidden devices), find the 'ISAPNP Read Data Port' device from the System Devices list. (Of note: once I successfully repaired this problem, this device no longer appears.)
在设备管理器中（注意选上查看->显示隐藏的设备。（译注：似乎不选也可））找到ISAPNP Read Data Port这个设备（当成功进行下面操作后， 这个设备将不再存在（译注：成功后会由Plug and Play Software Device Enumerator取而代之， 也就是说， 问题应该是对这个硬件的识别问题））

2. Right click the ISAPNP device, and select "Update Driver"
右击那个设备，选择"更新驱动程序"

3. Select "Install from a list or specific location"
选择"从列表或指定位置安装"

4. Select "Don't search. I will choose the driver to install."
选择"不要搜索， 我要自己选择要安装的驱动程序"

5. The step I left out on prior trials: UNSELECT "Show Compatible Hardware"
不要选中"显示兼容硬件"

6. Be sure that "(Standard System Devices)" is selected under Manufacturer.
厂商选择"(标准系统设备)"

7. Under Model, scroll down until you see "Plug and Play Software Device Enumerator". Select this item, and select "Next>".
设备选Plug and Play Software Device Enumerator， 单击下一步

8. You will receive some frightening error message that you should probably disregard.
你将会看到一个警告框， 忽略她。

9. Complete the installation of the driver.
完成安装。

经过实验， 这个方法确实可行， 至少是对我的机器配置。

Labels

Labels:

Comments

Post a Comment

Popular posts from this blog

Determine Perspective Lines With Off-page Vanishing Point

In perspective drawing, a vanishing point represents a group of parallel lines, in other words, a direction. For any point on the paper, if we want a line towards the same direction (in the 3d space), we simply draw a line through it and the vanishing point. But sometimes the vanishing point is too far away, such that it is outside the paper/canvas. In this example, we have a point P and two perspective lines L1 and L2. The vanishing point VP is naturally the intersection of L1 and L2. The task is to draw a line through P and VP, without having VP on the paper. I am aware of a few traditional solutions: 1. Use extra pieces of paper such that we can extend L1 and L2 until we see VP. 2. Draw everything in a smaller scale, such that we can see both P and VP on the paper. Draw the line and scale everything back. 3. Draw a perspective grid using the Brewer Method. #1 and #2 might be quite practical. #3 may not guarantee a solution, unless we can measure distances/p...
2 comments
Read More »

Chasing an IO Phantom

My home server has been weird since months ago, it just becomes unresponsive occassionally. It is annoying but it happens only rarely, so normally I'd just wait or reboot it. But weeks ago I decided to get to the bottom of it. What's Wrong My system set up is: Root: SSD, LUKS + LVM + Ext4 Data: HDD, LUKS + ZFS 16GB RAM + 1GB swap Rootless dockerd The system may become unresponsive, when the IO on HDD  is persistantly high for a while. Also: Often kswapd0 has high CPU High IO on root fs (SSD) From dockerd and some containers RAM usage is high, swap usage is low It is very strange that IO on HDD can affect SSD. Note that when this happens, even stopping the IO on HDD does not always help. Usually restarting dockerd does not help, but rebooting helps. Investigation: Swap An obvious potential root cause is the swap. High CPU on kswapd0 usually means the free memory is low and the kernel is busy exchanging data between disk and swap. However, I tried the following steps, none of the...
Post a Comment
Read More »

Moving Items Along Bezier Curves with CSS Animation (Part 2: Time Warp)

This is a follow-up of my earlier article.  I realized that there is another way of achieving the same effect. This article has lots of nice examples and explanations, the basic idea is to make very simple @keyframe rules, usually just a linear movement, then use timing function to distort the time, such that the motion path becomes the desired curve. I'd like to call it the "time warp" hack. Demo See the Pen Interactive cubic Bezier curve + CSS animation by Lu Wang ( @coolwanglu ) on CodePen . How does it work? Recall that a cubic Bezier curve is defined by this formula : B(t)=(1−t)3P0+3(1−t)2tP1+3(1−t)t2P2+t3P3, 0≤t≤1. In the 2D case, B(t) has two coordinates, x(t) and y(t). Define xi to the be x coordinate of Pi, then we have: x(t)=(1−t)3x0+3(1−t)2tx1+3(1−t)t2x2+t3x3, 0≤t≤1. So, for our animated element, we want to make sure that the x coordiante (i.e. the "left" CSS property) is \(...
3 comments
Read More »